| 1 | Has a risk assessment for the pressure washing task been completed and briefed to operatives? |
| 2 | Is a written permit to work or method statement for the pressure washing task available and signed? |
| 3 | Is the operator trained and competent to use a pressure washer on farm premises? |
| 4 | Is the work area free of bystanders and livestock, and adequately cordoned off? |
| 5 | Is the ground surface stable and non‑slippery where the pressure washer will be positioned? |
| 6 | Is the weather suitable, with no lightning or excessive rain, for operating electrical equipment? |
| 7 | Is the pressure washer engine and fuel system inspected for leaks, with fuel stored safely? |
| 8 | Is the fuel tank cap securely closed and leak‑free? |
| 9 | Is the oil level checked and within the correct range? |
| 10 | Is the coolant level checked and topped up if required? |
| 11 | Is the air filter clean and free of blockage? |
| 12 | Is the tyre or track condition and pressure checked and suitable for the terrain? |
| 13 | Is the high‑pressure hose free of cuts, abrasions, kinks, and securely attached to the pump and lance? |
| 14 | Is the lance/nozzle in good condition, free of blockage, and the correct pressure rating for the task? |
| 15 | Is the pressure gauge functioning and set within the recommended pressure range? |
| 16 | Is the pressure relief valve tested and functional? |
| 17 | Is the electrical cord in good condition with no cuts or exposed conductors, and the plug fitted securely? |
| 18 | Is the pressure washer plugged into a Residual Current Device (RCD) that is tested and operational? |
| 19 | Is any cleaning chemical or detergent used approved under the Control of Substances Hazardous to Health Regulations 2002 and have COSHH assessments been reviewed? |
| 20 | Are chemicals stored in labelled containers and are safety data sheets available on site? |
| 21 | Is the water runoff directed to a containment area to prevent environmental contamination? |
| 22 | Is the operator wearing appropriate PPE including waterproof overalls, safety goggles, hearing protection, gloves and non‑slip boots? |
| 23 | Is there a safe method for controlling high‑pressure water spray to prevent injection injuries? |
| 24 | Are barriers or signage in place to protect other workers and the public from the spray area? |
| 25 | Are fire extinguishers appropriate for chemical spills readily accessible? |
| 26 | Are first‑aid facilities and trained personnel available nearby in case of injection injury or chemical exposure? |
| 27 | Is an emergency stop button on the pressure washer functional and easily reachable? |
| 28 | Is a spill containment kit for cleaning chemicals on site and ready for use? |
| 29 | Is the spark plug clean and in good condition? |
| 30 | Is the fuel filter clean and free of blockage? |
| 31 | Is the battery securely mounted and terminals free of corrosion? |
| 32 | Is the water inlet filter clean and unobstructed? |
| 33 | Is the safety interlock (pump lockout) functional and engaged when required? |
| 34 | After use, is the pressure washer switched off, water drained and stored in a dry, secure location? |
| 35 | Is the equipment logged in the daily pre‑use register and any defects recorded for maintenance? |
